
中空玻璃自動打膠機常見故障分析
時間:2019-03-11 來源:http://www.szmdk.com/ 發布人:昌盛機械
很多人在使用中空玻璃自動打膠機時出現了各種各樣的問題。今天小編就給大家總結一下大家會經常遇到的幾種問題和解決辦法,希望對大家有所幫助。
Many people have various problems when they use hollow glass automatic gluing machine. Today, Xiaobian will give you a summary of several problems you will often encounter and solutions, hoping to help you.
,在給中空玻璃打膠時,可能會出現把膠擠出來的時候出現毛刺、或者不光滑、不平整的問題。發生這種情況的原因不外乎以下兩種:
First of all, when gluing hollow glass, there may be burrs, or non-smooth and uneven problems when gluing out. There are no more than two reasons for this:
1.新購買的中空玻璃自動打膠機,先檢查看看打膠機的出膠口是否是平整光滑。因為新機器可能會出現出膠口粗糙的情況,這時候就應該先把新機器出膠口打磨一下,等到平整、光滑了在試機器。
1. The newly purchased hollow glass automatic gluing machine, first check to see whether the gluing outlet of the gluing machine is smooth. Because the rubber outlet of the new machine may be rough, at this time we should first polish the rubber outlet of the new machine until it is smooth and smooth.
2.如果是已經使用很長時間的機器,可能是由于由于溫度傳感器不靈敏。導致實際的溫度和顯示的溫度不相同,可以加試著在顯示的溫度的基礎上,把溫度往上調,直到能正常出膠為止
2. If the machine has been used for a long time, it may be because the temperature sensor is insensitive. As a result, the actual temperature and the display temperature are different, we can try to raise the temperature on the basis of the display temperature until the normal glue can be produced.
再一個問題就是:打膠中出現斷膠的問題:
Another problem is the breakage of glue in gluing.
在使用中空玻璃自動打膠機打膠時,在打膠過程中很容易會出現斷膠或者直接堵塞的現象。這有很大的可能是由于丁基膠不符合行業質量標準,雜質太多造成堵塞才造成的。所以我們要盡量使用符合行業標準的合格產品。
When the hollow glass automatic gluing machine is used for gluing, it is easy to break or directly block the glue in the gluing process. This is probably due to the butyl rubber does not meet the industry quality standards, too many impurities caused by blockage. So we should try our best to use qualified products that meet industry standards.
今天的精彩內容就給大家呈現到這里了,收藏我們的官網:http://linshi.jncsjx.com 濟南昌盛機械,主營:雙組份打膠機等等各機型的打膠機以及中空玻璃生產線,歡迎來電咨詢。
Today's wonderful content is presented here. Collect our official website: http://linshi.jncsjx.com Jinan Changsheng Machinery, main business: two-component gluing machine and hollow glass production line. Welcome to inquire.
- 玻璃涂布機設備解析:技術分類洞察 2025/06/09
- 全自動鋁條折彎機長期使用中典型出現的問題是什么,怎么解決? 2025/06/07
- 中空玻璃加工設備:立式與臥式清洗機的差異化解析 2025/06/06
- 雙組份打膠機切換膠水清潔全流程解析 2025/06/05
- 全自動封膠線輔助傳送前限位是什么意思? 2025/06/04
- 雙組份打膠機是為解決什么問題產生的呢? 2025/06/03
- 全自動丁基膠涂布機操作注意事項:細節決定品質與效率 2025/05/27
- 雙組份打膠機:解碼膠水混合后的固化時間控制藝術 2025/05/26
- 臥式丁基膠涂布機傳動系統維護要點解析 2025/05/20
- 中空玻璃加工必備8大設備詳解 2025/05/19